UTP CAT3 24AWG HSYV-3 25X2X0.50
- PRODUCT DETAIL
UTP CAT3 24AWG HSYV-3 25×2×0.50
Productapplication：
Atpresent, the cable specified in the ANSI and EIA/TIA568 standards has atransmission frequency of 16MHz. It is mainly used in voice, 10Mbit/s Ethernet(10BASE-T) and 4Mbit/s token ring. The maximum length of network segment is100m.
Productcharacteristics：
（1）Easyto bend, easy to install, save wiring space;
（2）Thetransmission performance is stable and the crosstalk is low.
OperatingTemperature:-20℃～﹢60℃
Transmissionperformance ：
|
Physical/Electrical characteristics |
||||||
|
Differential Phase Delay(Max) |
45ns/100m |
Impedance |
4-250MHz 100±15Ω |
|||
|
Mutual capacitance(Max) |
5. 6nF/100m |
D. C Resistance(Max) |
7. 5Ω/100m at 20℃ |
|||
|
Dielectric Strength Between Conductors(Min) |
2.5kV/2s |
Permitted Bend Radius |
No less than eight times the cable diameter |
|||
|
Transmission Performance |
||||||
|
Frequency (MHz) |
Attenuation (Max) (dB/100m) |
NEXT(Min) (dB/100m) |
ELFEXT(Min) (dB/100m) |
RL (Min) (dB) |
Phase Velocity (Min) (m. /s) |
Phase Delay (Max) (ns/100m) |
|
4 |
3.8 |
66. 3 |
56 |
23 |
0. 604c |
552 |
|
8 |
5. 3 |
61. 8 |
49. 9 |
24.5 |
0. 610c |
547 |
|
10 |
6. 0 |
60. 3 |
48 |
25 |
0. 612c |
545 |
|
16 |
7. 6 |
57. 2 |
43.9 |
25 |
0. 614c |
543 |
UTP CAT324AWG
Product structure：
Standard：
YD/T 1019-2013 Multicore and symmetrical paircables for digital communications horizontal floor wiring
Technical parameter（typical）：
|
Specification |
Outer diameter(mm) |
characteristic impedance(Ω) |
Allowable bending radius (mm) |
Weight （KG/KM） |
|
UTP CAT3 24AWG |
10.0±0.5 |
100±15 |
No less than 8 times the OD |
Notes：1.Technical parameters can be adjusted according to customer’sneeds；
2.Specific design of outer sheath isavailable according to the customer’s needs.
NEXT：UTP CAT6 24AWG HSYV-6 4X2X0.510
